A vinyl siding is a plastic exterior cladding used for decoration and weatherproofing for a house. It is an engineered primarily from polyvinyl chloride or PVC. It is manufactured by coextrusion wherein two layers of polyvinyl chloride are placed down in a continuous process. A vinyl siding trim is also commonly used during residential constructions.
The product quality can be measured through its substantial differences and lasting durability. Thicker vinyl sidings are definitely more expensive which are more rigid and adds an aesthetic appeal to the whole structure and increases its life expectancy. Thicker grades of vinyl sidings are more resistant to fading and commonly has UV coating which filters out UV spectral light from the sun.
Well designed sidings have a proper loose nailing locking system that aids the product to expand and contract more to compensate with extreme temperatures. Upon purchasing these sidings, it is also essential to acquire a vinyl siding trim. This is the first thing to be installed prior to the sidings and it is used around the windows, corners, and doors.
It is usually 3 inches wide and has holes for nailing it into the structure. You must collect all the necessary trim pieces and place it in front of the targeted areas such as the windows and doors. You must also make sure that you have all the siding trims and the vinyl sidings enough to cover the supposed area before starting the project.
A building siding may come in various forms such as styles, designs, sizes, and colors. One example of it are vinyl sidings which are widely used because of its durability, minimal maintenance requirements, the products are cost-effective, resists bugs and rots, and combats extreme weather changes.
Some items are custom-made combined with the impact modifiers for consistent color as well as the best stabilizers. The latest technology ensures the best possible insulation performance and sheer strength. However, it is also necessary that you learn to replace vinyl sidings when needed. The bottom of each of this siding must hook on to a lock molded into the top of the piece below it.
The top of each siding be loosely nailed into the studs. The ends must be hidden by corner posts or J-channel with a ¼" gap between the end of the piece and the inside of the channel. This allows expansion within the pieces to counteract with the changes in temperature. The vinyl sidings must overlap by about an inch against each other. This will permit the material to expand and contract without exposing the sheathing of the siding underneath.
The common mistakes committed when replacing vinyl sidings on your own are over tight nailing and failure to pull each row up properly as you nail it. You must be able to pull up each row firmly and without fail which locks it solidly to the piece below it. This will finally help you in achieving the full height out of each piece of siding that has a consistent vertical spacing all around the house.
Did you know you can find out even more about having sidings? To do so visit http://bestsidingsite.com/ and see all of our FREE information on siding today!
No comments:
Post a Comment